Install XXKH3 on Samsung Galaxy S2 i9100 – How To

• Tweet

• Tweet

The XXKH3 must be the newest firmware to have leaked out for the Samsung Galaxy X2.  The date it was built was August 12, 2011 though it has leaked out at a later date. Having XXKH3, the software Samsung team is making it known once again that those at the mobile company are working in continuous basis in order to upgrade in the software S2 portion ever further, with a fact that the Samsung had done an excellent job incorporating the hardware of S2 together with the OS Android, that makes it the best phone having the good use of this exceptional power processing available having 1.2 GHz processor of dual-core Exynos.

And so, even as there are not great changes- or let us say the imperative changes-on XXKH3 in to create it as the necessary install but it is obvious that  fervent users, will not stop to try the greatest and the newest available. And so, let us see how to properly install XXKH3 in the Android phone Galaxy SII Samsung i9100.

Steps for Pre-Installation

1.        You need to back up your important data and Applications- contacts, SMS, bookmarks, APN’s (settings internet) etc. The Android backup guide will help you.

2.        When you have the PC Software Samsung Kies installed, you must first un-install this for the reason that I can interrupt its flashing process. When you have installed this for the driver’s sake which was not really working, ensure that you exit this Kies thoroughly prior to start the procedure shown below.

3.        This is important that you have its proper drives well installed. Just download the below links:

32 bit (x86) Windows |   64-bit (x64) Windows

Ways to Install the XXKH3 in i9100 Galaxy S2 (for users experienced)

Well, this is really easy when you have fun flashing by the use of Odin a couple numbers of times. Just download the XXKH3  then install it with the use of Odin 1.85 that is included on the package firmware itself. Place the file ‘CODE’ on the PDA tab, file ‘Modem’ in the Phone tab as well as ‘multi CSC’ in the CSC tab. Place the file.pit in a PIT tab as well as ensure Re-partition must be clicked too. Then hit the Start!

When you have not gotten what was mentioned above, do not fret one bit, your guide is below shown.

Guiding Steps for the installation of XXKH3 

When this will be the first time that you will wish to find a video on ways that a firmware is to be flashed with the use of software Odin in a windows Personal computer. And so, the video below given is all that you need. This will display installing the firmware KG1 on the S2 and this procedure is the same for KG 6. When you wish you may watch first the video to observed what is to be done, then you can do the flashing actually by just following the below given guide that which is greater than enough with its own also.

1. You must download the Firmware Android 2.3.4-XXKH3. Filename-19100XXKH3.rar.Size-297MB. Link Download.
2. You must extract the file downloaded “19100XXKH3-Firmware.rar “ in order to get the 7 files:

3. You must download the Odin3_v.1.85.zip then extract this in order to those two files required. –Odin 3.ini and Odin 3 v.1.75. Do not ever have the file.ini deleted since it is required also. If asked in below step 6, then open the ODIN just by double –click in the Odin 3 v 1.85.exe file

4. Then you must disconnect your device if it is connected to the personal computer. Then have your phone switched off. And wait five to six seconds for its vibration in order to confirm it is switched off completely.

5. Then now, and place this Galaxy S2 to its Download Mode=click and hold its keys with- Volume_DOWN + Home + Power. This is really required to install the XXKH3 with the use of Odin Software PC.

6. Then you have to open the Odin (from the step 3- Odin 3v1.85.exe.Admin privileges will be required!

7. And connect your own device to the personal computer now. Then you must get this message ‘Added!’ under the message box Odin at the left bottom. When you do not get the message, then there is an issue probably with drivers. Ensure that you have the drivers are installed-and if not, then use the link(s) above given at this pre-installation thinking above heading. If when you do not get the message still ‘Added’ and then try to restart the personal computer or another port USB. You may also try to install the software Kies as the last resort, then this will surely fix it.

8. Choose the files on Odin in the respective tabs

• Press the Tab PDA, then choose CODE_I9100XXKH3_CL479037_REV02_user_low_ship.tar.md5 (from step 2.1)
• Press Phone Tab, then choose MODEM_I9100XXKH3_REV_02_CL1050544.tar.md5 (from the step 2.6)
• Press its CSC Tab, then choose- GT-I9100-CSC-MULTI-OXAKH3.tar.md5 (from step 2.4)
• Press the tab PIT, then choose -u1_02_20110310_emmc_EXT4.pit (from step 2.7)

9. Important! Ensure the three checkboxes must be already ticked- Auto Reboot, F. Time Reset and Re-Partition. Since we use the file .pit, checkbox Re-Partition must be clicked also, and not otherwise.

10.Everything must be double-checked that is mentioned in the step 8 & 9 above.

11. And now, tap the button START to have this flashing process begin. If this is finished your device will reboot automatically- then you must have the cable unplugged then. Additionally you will get the PASS (having the green background) and the message at the box left most on the top of Odin. When it is red and having FAIL written on this, then this flashing process was not successful. Then you try again, so then see to it that you will not complete this whole method with no break at all.

12. If the phone will restart, then it will run the newest version 2.3.4 Android OS along custom Samsung TouchWiz 4 UI on top it.  Verify your devices version Android here <Settings< About Phone.

Optional -When you find that this guide is very useful then share it along many others also on forums, Facebooks/Google+pages, Twitters,  webpages etc. That will also help them grow also!

When your device was already rooted before the flashing, then you like this root back again, correct? Well, that is very obvious. Rooting S2 can be very easy, all that you need maybe the flashing developer Chainfire’s -Root Kernel(CF) and with the use of PDA Tab Odin- that which is fairly easy, thanks all to Chainfire!